Loads listed are test loads in the author's firearms, and may not be safe in any other firearms.Īll loads developed with New Starline Brass and Winchester Small Pistol Primers. Always reduce all minimum powder charges by 10% and 'work up' a load if no signs of over-pressure are evident (bulged cases, flattened primers, etc.). The biggest problem you will face is finding reloading data. Nothing can replace experience and a good reloading guide from a reputable manufacturer of reloading components. ![]() Reloading metallic cartridges may be extremely hazardous if not done properly. All loads developed with New Starline Brass and Winchester Small Pistol Primers. (If using this load data for TT-33 Type Tokarev Pistols, Start at 15% below the Min. Buyers should be aware the Thompson Contenders chambered for the 32-20 have a bore diameter of.308 NOT.312 as in all other applications. Has anybody else had this problem with the Lee 7.62X25 Tok die set?ħ.62x25 Tokarev Load Data for the CZ-52 Pistol.ĭesigned to shoot in the 7.62x25 Tokarev. I wound up making my own expander ball for the case since the thing that comes with the Lee FL die didn't seem to be working at all. ![]() I thought maybe I needed to bell the mouth of the cartridge case a bit more but that didn't help. I finally tried some yesterday and the bullets went into the brass really screwy - like off-center. I've reloaded my Tok brass but always with something other than the orignal 85 grain bullet.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |